srtm出第二版了- -| 回首页 | 2006年索引 | - -还是关于srtmv1和v2

srtm v1 & v2 之比较(附图)

关键词srtm                                          

    srtm出了第二版了,对一些空白数据进行了补充,其说明原文如下:

Version 1 of the SRTM data consists of the original Digital Elevation Models produced
by the SRTM project with data from the STS-99 mission in Feb., 2000, and delivered to
the National Geospatial-Intelligence Agency (NGA.) These data are unedited and
contain spurious data points in area of low radar backscatter such as water bodies.

Version 2 is the results of a substantial editing effort by the NGA and exhibits well
defined water bodies and coastlines and the absence of spikes and wells (single pixel
errors), although some areas of missing data (‘voids’) are still present. The Version 2
directory also contains the vectorized coastline mask used by NGA in the editing, called
SRTM Water Body Data (SWBD), in shapefile format.

Version 2 is a superior product and it is recommended for most users.

由说明可以看出,补充的部分主要就是水体的空白部分,利用gm软件和v1,v2版数据进行比较,主要有以下部分

1.海平面,过去的海面可以用“波涛汹涌”来说明,这次都统一归0,用gm看来颜色一致,不再色彩斑斓。

2.河流部分,空白部分基本补齐,根据观察看来,采用的是补成水平面。

3.山区,基本没有补充,有少量的小空白貌似补充了(不能判断是否是山区水库水体)

4.数据变化,有较小的变化,通过打开多个同一区域的v1,v2数据,同一区域内最高海拔和最低海拔大部分都降低了。

以下以n29e103区域的v1和v2版数据,使用global mapper软件绘图来说明一下变化。图中直接标注数字的为整0.25度(即n29.25e103.25,n29.25e103.50.......)处的海拔高度,r1-r5为填补后水面海拔高度

1.v1版

2.v2版

3.SRTM Water Body Data (SWBD)

4.v1版使用srtmfill填充后

由图可以看到,变化有如下一些

1.填充状况:水体绝大部分都已填充,山区有少量的填充,绝大部分山区,尤其海拔较高,地形较陡的地图都没有变化。

2.数据变化,9个海拔点中,除了n29.25e103.25降低1米外,其他8个点都没有变化,最高海拔由3486变为3492,最低点由286变为307米,其他各图也有变化,看来是填补了少量的新数据。

3.比较2图和4图,可以看到,v2版新补水面海拔均为整数值,而利用srtmfill填补的数值不一定。猜测v2水面是单独填充的。

总之,v2主要对水体空白进行了填充,而山体空白缺失仍然没有得到改变,现在希望的就是能早日出来修补山体空白的v3或是更高版本

【作者: laobaigu】【访问统计:】【2006年04月3日 星期一 10:43】【 加入博采】【打印

Trackback

你可以使用这个链接引用该篇文章 http://publishblog.blogchina.com/blog/tb.b?diaryID=4800979

博客手拉手

回复

验证码:   
评论内容: